12 Head Ultrasonic Monzon Humidifier

The Monzón Humidifier is made out of quality PVC with a water-filling system that contains a float, kind of like a cistern. As the water runs out, it’ll begin to fill up automatically. It also has a fan system and you can direct the actual humidity spray towards the area of your grow room that needs it the most. You can also use the 15w Clip-On Fan.

Monzón Humidifier Automatic Filling System

You're going to need to take care with the water you use; if you use non-treated water you may end up ruining the humidifier membranes. We recommend using soft or osmosis water in order to avoid such issues. If the water level is too low, the Monzón humidifier will automatically stop; this stops the device from burning out due to lack of liquid.

Increase the Humidity in your Grow Room with the Monzón Humidifier

You can automate this process easily. It’s incredibly practical for large grow rooms, in which many people end up using various devices; this is the only one you’ll need. It uses 220v and is perfect for grow rooms between 20 and 60 square meters.

Monzón Humidifier Technical Details:

• Humidity dispersion: 5kg/h
• Air: 120m3/h
• Outlet: 110mm
• Water particle size: 10 microns
• 300w
• Water duct size: 1/2"
• Membranes: 12
• Size: 470x240x33mm