Humidity Controller

Humidity Controller for Proper Parameters

Use a humidity controller in your grow in order to keep your grow just as humid, or not, as you need it to be – extremely simple.

You can program it to work when humidity gets too low (humidifying mode that works by connecting the Ultrasonic Humidifier (1, 3 Or 9 Membranes) to the controller or too high (dehumidifying mode, which works by connecting a dehumidifier or extractor).

How to use the Humidity Controller

To program it, when it’s off, hold down the On button and press the downward arrow – you’ll either see drops or a flame. The drops mean that it’ll work with the humidifier, turning it one once the humidity levels get too low.

The flame indicates it is ready to be used with an extractor or dehumidifier in order to decrease humidity automatically when needed.

It has a digital screen that shows you how humid your grow room/tent is, controlling any connected devices with extreme precision.

Technical specifications

• Voltage in use: 230 V AC/50Hz
• Max. load: 16A 3680 w – Load resistance / 2A 460 w inductive load.
• Temperature in use 5-40ºC
• Storage temperature: -10-50ºC
• Humidity scale: 30-90%
• Precision: +/- 5%
• Probe frequency: 10 s