Twin controller Mk2

Twin Controller MK2 to Monitor Grows' Temperatures Perfectly

The MK2 Twin Controller is a temperature controller made with the latest technology. When turned on and all set up, it calculates the best set up and will set your extractor to the perfect speed so that there’s no temperature changes in your grow – it takes about 5 minutes to fully set up.

Measure the speed at which your ventilation system should work and regulate the pressure accordingly 

It’ll keep up a constant speed, and it’ll also make sure that there’s not more air coming in than there is air going out through negative pressure, making sure that no air can escape through anywhere that’s not an extractor, which will need to have a Anti-Odor Filter Mountain Air attached so that the extracted air doesn’t stink of weed.

• If you have two of the same extractors you’ll need to increase the right wheel to between 75/90% so that it works properly, and if one of them is more powerful than the other you’ll need to connect the strongest one in Out and the second one in In.
• For extractors that have different wattages you won’t need to regulate the negative pressure at all, so you won’t need to place it between 75/90% - available in two AMPages to adapt to your needs.

Twin controller Mk2 available models:

• 4.5 A with a 2 m sensor that supports 2.2 A or 480 w per plug.
• 7 A with a 3 m sensor that supports 3.5 A or 770 w per plug.